문제
정수를 저장하는 스택을 구현한 다음, 입력으로 주어지는 명령을 처리하는 프로그램을 작성하시오.
명령은 총 다섯 가지이다.
push X: 정수 X를 스택에 넣는 연산이다.
pop: 스택에서 가장 위에 있는 정수를 빼고, 그 수를 출력한다. 만약 스택에 들어있는 정수가 없는 경우에는 -1을 출력한다.
size: 스택에 들어있는 정수의 개수를 출력한다.
empty: 스택이 비어있으면 1, 아니면 0을 출력한다.
top: 스택의 가장 위에 있는 정수를 출력한다. 만약 스택에 들어있는 정수가 없는 경우에는 -1을 출력한다.
- 입력
첫째 줄에 주어지는 명령의 수 N (1 ≤ N ≤ 10,000)이 주어진다. 둘째 줄부터 N개의 줄에는 명령이 하나씩 주어진다. 주어지는 정수는 1보다 크거나 같고, 100,000보다 작거나 같다. 문제에 나와있지 않은 명령이 주어지는 경우는 없다.
- 출력
출력해야하는 명령이 주어질 때마다, 한 줄에 하나씩 출력한다.
- 예제 입력 1
14 push 1 push 2 top size empty pop pop pop size empty pop push 3 empty top
- 예제 출력 1
2 2 0 2 1 -1 0 1 -1 0 3
- 예제 입력 2
7 pop top push 123 top pop top pop
- 예제 출력 2
-1 -1 123 123 -1 -1
- 첫번째 시도
n = int(input()) stack = [] for _ in range(n): act = input() if ' ' in act: act, num = act.split(' ') if act == 'push': stack.append(int(num)) elif act == 'pop': if len(stack) == 0: print(-1) else: print(stack[-1]) stack.pop() elif act == 'size': stack.size() elif act == 'empty': if not stack: print(1) else: print(0) elif act == 'top': if len(stack) == 0: print(-1) else: print(stack[-1])
- 두번째 시도
import sys input = sys.readline.stdin n = int(input()) stack = [] for _ in range(n): act = input() if ' ' in act: act, num = act.split(' ') if act == 'push': stack.append(int(num)) elif act == 'pop': if len(stack) == 0: print(-1) else: print(stack[-1]) stack.pop() elif act == 'size': stack.size() elif act == 'empty': if not stack: print(1) else: print(0) elif act == 'top': if len(stack) == 0: print(-1) else: print(stack[-1])
- 세번째 시도
import sys input = sys.stdin.readline n = int(input()) stack = [] for _ in range(n): act = input() if ' ' in act: act, num = act.split(' ') if act == 'push': stack.append(num) elif act == 'pop': if len(stack) == 0: print(-1) else: print(stack.pop()) elif act == 'size': pritn(len(stack)) elif act == 'empty': if not stack: print(1) else: print(0) elif act == 'top': if len(stack) == 0: print(-1) else: print(stack[-1])
- 정답
import sys n = int(sys.stdin.readline()) stack=[] for i in range(n): command = sys.stdin.readline().split() if command[0]=='push': stack.append(command[1]) elif command[0]=='pop': if len(stack)==0: print(-1) else: print(stack.pop()) elif command[0] == 'size': print(len(stack)) elif command[0] == 'empty': if len(stack)==0: print(1) else: print(0) elif command[0] == 'top': if len(stack)==0: print(-1) else: print(stack[-1])
- 정답 코드와 내가 푼 풀이는 크게 다른 부분이 없는데 어떤 부분에서 틀렸는지 잘 모르겠다.