✨ Topology를 구성하시오
👉 Topology 전체 구성도
👉 Topology 추가 구성도
👉 VPCS ip 설정
🖋 VPCS 20
VPCS> ip 192.168.33.164 255.255.255.224 192.168.33.161
👉 Configuring Vlan
🖋 M1
Switch(config)#vlan 10
Switch(config-vlan)#name vlan10
Switch(config-vlan)#vlan 20
Switch(config-vlan)#name vlan20
Switch(config)#int e0/2
Switch(config-if)#switchport mode access
Switch(config-if)#switchport access vlan 10
👉 Configuring EtherChannel
🖋 M1
Switch(config)#int e1/0
Switch(config-if-range)#channel-group 1 mode desirable
Switch(config-if-range)#exit
switch(config)# int po 1
switch(config-if)#switchport trunk encapsulation dot1q
switch(config-if)#switchport mode trunk
switch(config-if)#switchport trunk allowed vlan 1,10,20
👉 Trunk encapsulation
🖋 M1
Switch(config)#int range e0/0,e0/2-3
Switch(config-if-range)#switchport trunk encapsulation dot1q
Switch(config-if-rnage)#switchport mode trunk
👉 Configuring an HSRP Standby
🖋 M1
Router(config)#int vlan 10
Router(config-if)#no shutdown
Router(config-if)#exit
Router(config-subif)#ip add 192.168.33.130 255.255.255.224
Router(config-subif)#standby 10 ip 192.168.33.129
Router(config-subif)#standby 10 priority 150
Router(config-subif)#standby 10 preempt
👉 configuring IP Routing
🖋 M1
Switch(config)#ip routing
Switch(config)#int vlan 10
Switch(config-if)#ip add 192.168.33.130 255.255.255.224
Switch(config-if)#no shut
Switch(config-if)#end
Switch(config)#ip routing
Switch(config)#int e0/1
Switch(config-if)#no switchport
Switch(config-if)#ip add 192.168.33.251 255.255.255.248
Switch(config-if)#no shut
Switch(config-if)#end
Switch#show ip interface brief
👉 Configuring OSPF
Router(config)#route ospf 1
Router(config-router)#network 192.168.33.128 0.0.0.31 area 0
Router(config-router)#network 192.168.33.160 0.0.0.31 area 0
Router(config-router)#network 192.168.33.248 0.0.0.7 area 0
👉 ping 결과
🖋 192.168.33.132에서 11.11.11.11 ping 결과
