How can You Configure your Cisco Router?

Bought a new Cisco router but do not know how to configure it? Well, don’t worry as you are in the right place. Here, you can learn about the step-by-step procedure to configure your new or already purchased Cisco router. Read this article till the end to learn about the Cisco router configuration process.

1. Step-by-step guide to configure a Cisco router
   Decide a suitable place for your router.

2. Link the router with the internet. For that, connect the internet cable to the router.

3. Now, connect the router with the wireless gateway. Plugin the ethernet cable to the router’s WAN port so that your router gets connected with your ISP

4. Configure your router using your ISP’s web dashboard. Enter the IP address printed on the back of your router. If you can not find one, use 192.168.1.1 as the common IP address.

5. Now, create a username and password for the configuration. For that, first of all, enter the login credentials available on the router or in the user manual.

6. Update the router’s system software and firmware, if required.

7. Finally, set up the router’s Wi-Fi password to make it available for all the devices.

With this, you have successfully configured your router. If still you face any problems with the configuration process, contact your ISP or router tech support. Moreover, make sure you secure your Wi-Fi password from the intruders.