How to fix the dc adapter in lenovo laptop?

If you are using the Lenovo ideapad z50 or older version, which uses the USB Charger. Many times, it will short the DC connector itself. That’s all because the it’s DC connector couldn’t handle the power coming from the charger.
In such a case, your laptop will stop charging. In that a case, you have will be left with the two choices- 1. Use a new DC connector or fix the existing one.
Buying a new DC connector will not fix the problems. after certain point of time, it may also get short. So I will suggest you to fix the existing one. If you don’t know how to do fix a electrically short DC charging socket. Here are the complete guide to do that, you may use that on your device.

How to fix the DC connector error on the Lenovo laptop?

1. First of all, you need to shut down the computer.
2. Remove the charging adapter from the computer.
3. Unlock the battery and remove it carefully.
4. Now unscrew the laptop’s back panel.
5. Unplug all connectors from the motherboard.
6. Now remove the processor fan, and then take out the front panel genetly, which has keyboard, and touch pad.
7. Now do the soldering on the DC connectors wire, which has been disconnected.
8. Now connect the wires to the motherboard, and then install the font panel.
9. Connect the keyboard and touchpad to the device as well.
10. Install the back panel and screw it properly.
11. Install the battery into the laptop.
    Finally, power on the laptop and plugin the charger. It will be charging the battery. In case, Lenovo laptop not charging while plugged in. you need to disconnect and reconnect the charger. Or check the wiring for your laptop.